How to Remove Wrinkles from a Custom Jacket After International Shipping

 

 

Tips from fansidea.com

There's nothing quite as frustrating as receiving a custom jacket that you ordered online, only to find that it's covered in wrinkles due to the compression it experienced during international shipping. But don't worry – there's an easy fix! In this blog post, we'll show you how to remove wrinkles from your custom jacket using a few simple steps.

Step 1: Unpack the Jacket

Once you receive your jacket, remove it from the packaging and lay it flat on a clean, dry surface. This will allow you to see the extent of the wrinkling.

Step 2: Prepare Your Steam Iron

Next, fill your steam iron with water and turn it on to the appropriate setting for your jacket's fabric type. Be sure to follow the manufacturer's instructions for your particular iron.

Step 3: Iron the Jacket

Hold the steam iron about 1 inch away from the wrinkled areas of the jacket and let the steam do the work. Slowly move the iron back and forth over the wrinkled areas until the wrinkles disappear. If necessary, you can turn the jacket over and iron the inside as well.

Step 4: Hang the Jacket

Once you've finished ironing, hang the jacket up to dry for a few hours. This will allow any remaining wrinkles to fall out naturally.

By following these simple steps, you can remove wrinkles from your custom jacket and restore it to its original state. Remember to always follow the manufacturer's instructions for your specific iron and jacket type, and don't hesitate to contact us if you have any questions or concerns. With a little patience and care, your custom jacket will look as good as new!

Custom Black Black-White Jacket	Custom Black Black-Old Gold Jacket	Custom Brown Gold-White Jacket	Custom Black Royal-White Jacket	Custom Gray Black-White Jacket